top of page

Dormer, Hip-to-Gable or Velux? Choosing the Right Loft Conversion for Your Hertfordshire Home

Nov 1
3 min read

The right loft conversion depends less on what you want and more on what your roof will allow. Here’s how to match the conversion to the house, using the property types we see most across Hertfordshire.


JMB builders working inside a loft conversion in Potters Bar, Hertfordshire.
JMB Design and Build have a wealth of experience in loft conversions.

Start with your roof

Stand outside and look up. If the roof has a ridge running front to back with sloping ends (a hipped roof), you’re almost certainly looking at a 1930s or post-war home and a hip-to-gable or dormer conversion.


If it’s a simple pitched roof with vertical gable walls at each end, you’ve got more height to play with and a rear dormer or even a Velux conversion may do the job. If it’s a shallow modern truss roof, the conversion will need significant structural work.


Velux (roof-light) conversions

The simplest option: windows set into the existing roof slope, no change to the roof shape. Best for homes with generous existing headroom, typically Victorian and Edwardian properties with steep roofs. Lowest cost, fastest build, least likely to need planning permission. The limitation is usable floor area, since the sloping sides restrict where you can stand.


Rear dormer conversions

The Hertfordshire workhorse. A box-shaped extension projects from the rear roof slope, giving full-height space across most of the loft and room for a proper bedroom and en-suite. It suits almost every house type and usually falls within permitted development.


Our Byng Drive project in Potters Bar turned a modest three-bedroom home into a four-bedroom one this way, with a spacious master suite and new staircase.


A newly constructed bedroom within a loft conversion.
This additional bedroom was part of a completed loft conversion project in Potters Bar, Hertfordshire.

Hip-to-gable conversions

For the hipped-roof semis and detached homes that make up so much of Potters Bar, Radlett, St Albans and Bushey. The sloping end of the roof is built up into a vertical gable wall, which dramatically increases internal volume. Combined with a rear dormer, it creates the largest possible space and is the go-to for a master suite with dressing room.


It changes the external appearance more, so planning is more often needed, especially in conservation areas.


L-shaped dormers

For properties with a rear addition (common on Victorian terraces in St Albans and across North London), an L-shaped dormer extends over both the main roof and the addition, often creating space for two rooms. It’s the most ambitious option and the one that adds the most square footage.


Don’t forget the details

Whichever type you choose, the things that make a conversion feel special are the same: the quality of the glazing, the staircase, the storage built into the eaves, and the bathroom. The glazed gable at our New Trees project in Kings Langley is a good example of how a single design decision can transform both the space and the look of the house.


A loft conversion in the middle of construction.
This loft conversion is the process of being completed in Kings Langley, Hertfordshire.

Frequently asked questions


How much headroom do I need?

As a rule, at least 2.2 metres from the top of the existing ceiling joists to the underside of the ridge. Less than that, and the conversion will need to lower ceilings below or raise the roof.


Can I convert a loft with a water tank or boiler in it?

Yes. Tanks are usually removed by switching to a combi or unvented system, and boilers can be relocated.


Which type adds the most value?

The one that creates a proper bedroom with its own bathroom. In Hertfordshire’s market, that’s usually a dormer or hip-to-gable conversion.


Want to know what your roof can become?

Get in touch for a free assessment.

 
 
 

Comments


J.M.B DESIGN & BUILD Ltd

14 The Service Road,

Potters Bar,

Hertfordshire, England, UK

EN6 1QA

​

Tel: +44 (0) 1707242892

​

enquiries@jmbdesignandbuild.co.uk

COVID-19 POLICY

PRIVACY POLICY

J.M.B Design & Build Ltd Registered number: 11608132. Registered in England and Wales. VAT Registration Number: 320216363.

  • Facebook
  • Instagram

© 2024 J.M.B DESIGN & BUILD Ltd. All Rights Reserved.

Untitled design (23).png
bottom of page